Silicone Coating Material
Shin-Etsu silicone coating materials have various properties such as high adhesiveness, improved heat resistance, improved moisture resistance, stress reduction. It plays a major role to show better performance on semiconductor device with protecting electrical.
Shin-Etsu offers various products from gel to rubber, meeting customer requirement.
Silicone coating materials have excellent light resistance (coloring prevention by light) by using of the properties of silicone. It can be used not only for semiconductor applications but also as a protective material for various materials due to thermal stability, high adhesion to inorganic materials.
Properties
| Product | Feature | Cure Condition | Melt viscosity | Flow | Hardness | Applicable Temperature |
|---|---|---|---|---|---|---|
| Pa.s | mm/g | |||||
| KJR-9022 | Silicone Elastomer | 150°C | 4 | - | A40 | -50C ～ 200C |
| KJR-9032 | Silicone Elastomer | 2 | - | A20 | -50C ～ 200C | |
| LPS-2401 | Silicone Elastomer | 1 | - | A10 | -50C ～ 200C | |
| KJR-9010 | Silicone Gel | 1 | - | *65 | -50C ～ 200C | |
| KJR-9014 | Silicone Gel, Globetop | 10 | 33 | *65 | -50C ～ 200C | |
| KJR-9017 | Silicone Gel, Cold resistance | 1 | - | *65 | -80C ～ 250C | |
| LPS-2434 | Silicone molding Cold resistance | 1 | - | A55 | -80C ～ 250C | |
| KJR-9090 | Globetop, Photocoupler | 10 | 25 | A20 | -50C ～ 200C | |
| KJR-9091 | Globetop, Photocoupler | 20 | 15 | A35 | -50C ～ 200C | |
| KJR-9025-2 | Globetop, Low temp. Cure | 80°C | 7 | 30 | A20 | -50C ～ 200C |
| KJR-9025-4 | Globetop, Low temp. Cure | 8 | 25 | A30 | -50C ～ 200C | |
| *penetration |
Liquid crystal electrode protective silicone resin
| Appearance | Melt viscosity | Hardness | Tack Free time | Cure Condition | Cure Method | |
|---|---|---|---|---|---|---|
| KJR-7805H-2 | milk-white | 9Pa.s | 50 TypeA | - | Metal Halide lamp 800mJ/cm2 | UV Cure |
| KJC-7805T-3 | Transparent | 4Pa.s | 55 TypeA | - | Metal Halide lamp 800mJ/cm2 | UV Cure |
| KJR-4013 | grayish white | 5Pa.s | 40 TypeA | 2hr | RT/24hr | Moisture Cure |
| KJR-4016 | Yellow Translucent | 3Pa.s | 25 TypeA | 15min | RT/24hr | Moisture Cure |
Silicone impregnation Material
| Product | Feature | Cure Condition | Melt viscosity |
|---|---|---|---|
| mm2/sec | |||
| KJF-810 | Excellent impregnation to dielectric layer, Waterproof | 150°C | 25 |
| KJF-816 | Waterproof | 100 |
Proction Coating Material
| Product | Feature | Cure Condition | Moisture permeable g/m2 24hr | Hardness |
|---|---|---|---|---|
| KJC-7022 | Solvent contain | Room Temp. | >20 | Shore D30 |
| LPS-7580-2 | dilute by solvent | 150°C/4hr | 4 | Shore D 70 |
* The data of each product that exists in the above-mentioned table is not a standard value. Please test without fail before use beforehand, and confirm whether to suit use.