Shin-Etsu Chemical Co.,Ltd. Organic Electronics Materials Dept.

Silicone coating material / adhesive

Shin-Etsu's silicone-coating material plays a big role in achieving better performance of semiconductor device for electrically protects of semiconductor elements. It can used for surface coating material of semiconductor devices which has various properties such as high adhesiveness, heat resistance improvement, moisture resistance improvement, and internal stress relief.
Shin-Etsu have a wide range of products from gel to rubber to meet customer requirement.
Shin-Etsu also provide UV + heat and thermosetting materials that can be used for lid seals and adhesion to urethane. This material has excellent internal stress relief and high adhesion to the target object.
This material has excellent light resistance (prevention of coloring by light), thermal stability, and adhesion to inorganic substances, which is used by advantages of silicone characteristics. It can be used not only for semiconductor applications but also as a protective material for various materials.

Properties

Product Feature Cure Condition Melt
viscosity
Flow Hardness Applicable
Temperature
Pa.s mm/g
KJR-9022 Silicone Elastomer 150°C 4 - A40 -50°C ~ 200°C
KJR-9032 Silicone Elastomer 2 - A20
LPS-2401 Silicone Elastomer 1 - A10
KJR-9010 Silicone Gel 1 - *65
KJR-9014 Silicone Gel
Globetop
10 33 *65
KJR-9017 Silicone Gel
Cold resistance
1 - *65 -80°C ~ 250°C
KJR-9090 Globetop
Photocoupler
10 25 A20 -50°C ~ 200°C
KJR-9025-2 Globetop
Low temp. Cure
80°C 7 30 A20
*penetration

Proction Coating Material

Product Feature Cure Condition Moisture permeable
g/m2 24hr
Hardness
KJC-7022 Solvent contain Room Temp. > 20 Shore D30
LPS-7580-2 dilute by solvent 150°C / 4hr 4 Shore D 70

* The data of each product that exists in the above-mentioned table is not a standard value. Please test without fail before use beforehand, and confirm whether to suit use.