Silicone resin for high pressure resistance and high heat resistance device coating
KJR series
Shin-Etsu Chemical's silicone resin for high-voltage and high-heat-resistant device coating is a polyimide silicone that stabilizes the PN junction surface, minimizes leakage current, and protects against mechanical impact and contaminants of diodes and transistors,
KJR series have excellent heat resistance, electrical characteristics in a wide frequency range, and high adhesive to various substrates, and is effective in improving reliability.
Properties
Product | Feature | Melt viscosity |
Non volatile Part |
Final Cure temp |
Volume Resistivity |
Dielectric Strength |
Tg | Applicable Temperature |
---|---|---|---|---|---|---|---|---|
mm2/sec | % | TΩ・m | kV/0.1mm | °C | ||||
KJR-651 | Standard ≺ 50μm |
2000 | 24 | 250 | 200 | 13 | 250 | -50°C~300°C |
KJR-655 | Thin layer 20-30μm |
400 | 15 | 200 | 13 | 250 | ||
KJR-657 | Thick layer 50-100μm |
200 | 44 | 200 | 12 | 230 | ||
KJR-6501 | Low Temp. Cure NMP Free |
80 | 17 | 180 | 200 | 11 | 200 | -50°C~300°C |
X-45-6202 | High Tg | 400 | 13 | 250 | 200 | 13 | 300 | -50°C~300°C |
KJR-657DS | NMP Free | 200 | 45 | 250 | 200 | 11 | 230 | -50°C~300°C |
* The data of each product that exists in the above-mentioned table is not a standard value. Please test without fail before use beforehand, and confirm whether to suit use.