Optical fiber coating material
Optical fiber coating material is protects the surface of very thin optical fiber with a cross section diameter of 125μm and improves strength with excellent in heat resistance, cold resistance, and demonstrates stable function over a wide temperature range.
Besides the heat curing type, there are products of UV curing type corresponding to high speed drawing.
Properties
| Product | Feature | Melt viscosity | Refractive index | Hardness |
|---|---|---|---|---|
| Pa.s | nD25 | |||
| OF-180 | Standard, Heat cureable | 2 | 1.41 | A60 |
| OF-182 | High Refractive index, Heat cureable | 2 | 1.52 | A25 |
| OF-191 | Hard, Heat cureable | 3 | 1.41 | A80 |
| OF-207 | UV Cure | 1 | 1.44 | A50 |
| OF-211 | High Refractive index, UV Cure | 5 | 1.49 | A60 |
| OF-600 | Low Refractive index | 4 | 1.33 | A30 |
| OF-700 | Transparent, High Refractive index, Heat cureable | 0.4 | 1.50 | D75 |
| OF-38E(7CS) | Matching Silicone Oil | 7cs | 1.469 | - |
| OF-38E(50CS) | Matching Silicone Oil | 50cs | 1.469 | - |
* The data of each product that exists in the above-mentioned table is not a standard value. Please test without fail before use beforehand, and confirm whether to suit use.